Email: info@jelsyslaser.com

Tel: 008618201460928

WhatsApp : 008615200089972

Zip code:102600

Address: XingHua Street DaXing Beijing China

Tel: +86-10-60350373

Home / Vacuum

Vacuum roller+infrared laser+RF slimming machine

2017-03-27 16:26:38

System llustration

 
 

A: Controlling system:LCD, Chromatic Touch Screen, power switch, micro-computer controlling system etc. to control operation of whole system;
B: Endermologie and pulse mechanical tissue manipulation;
C: Bipolar RF (Radio Frequency): High power output radio frequency system;
D: Near-infrared laser system: 940nm semi-conductor laser technique

 
Handpiece illustration
 
1) Operation illustration of NO. 1 handpiece:
A: Press “▲”, “▼” to select specifications;
B: Press “◄”,“► ” to adjust parameters;
C: Then you press “Enter” to work;
D: You could also do the above adjustment on system display screen;
E: Parameters could not be adjusted while working.
2) Display for NO.1 handpiece:(See picture)
 
 
 
A: Standby B: Preparation
C: Time D: Energy of RF parameters
E: Near-infrared laser F: Distinction of negative pressure parameters
G: Rev of roller H: Pulse time
I: Absolute value
 
Parts of host system
 
 
Working conditions & technical specification
 

Working conditions
1) Environmental temperature of operation: 10ºC—30ºC;
2) Environmental temperature for keeping in store: 0—50ºC;
3) Relative humidity: ≤70%;
4) Air pressure: 860hPa~1060hPa;
5) Environment request: avoid direct radiation of intense light
Note: If the temperature in the room is too low, or the instrument have been not used for many days, the temperature of the whole system shall recover to 10 ºC or higher before start.
Technical specification

 
Items
Specifications
LCD screen
1) Display screen: 10.4/8″ Chromatic Screen
2) Display screen of handpiece
Display screen on handpiece 1: 2.4″
Display screen on handpiece 2: 1.9″
Working mode
Pulse
Pulse width
0.5s-7.5s
Negative pressure
1) Absolute value: 80kPa -10kPa (60.8cmHg - 7.6cmHg)
2) Relative value: 20kPa -90kPa (15.2cmHg  68.4cmHg)
Rev of roller
0-36 rpm
Working mode for roller
4 types
Safety checking
Real time on line
RF frequency
1-5MHz
RF energy density
Max: 60J/cm
Laser wavelength
940nm
Laser power
MAX 20W
Cavitation
40K
Number of handpiece
5
Treatment area
4mmx7mm、8mmx25mm、30mmx50mm、40mmx60mm
Rated input power
750VA
Mode of power supply
AC230V±10%,50Hz±1Hz/ AC110V±10%,60Hz±1Hz (Optional)
G.W.
72.7KG
Packing size
127*70*75CM
Packing method
Wood case
Packing list
No. 1 big vacuum RF laser head for body * 1
No. 2 vacuum RF laser head for arms * 1
No. 3 vacuum RF laser head for face * 1
No. 4 small vacuum RF laser head for eyes * 1
40K cavitation head * 1
Power cord * 1
Rotary knob screws * 12
Acrylic accessories hanging rack * 2
Aluminum holder * 1
Acrylic accessories hanging rack screws * 6
Clothes for treatment * 2
Safety

 

This chapter shows the safety measures need to be considered when you use N8.The operators and maintain personnel should be familiar with the safety requirements and procedures when they use the equipment.
Optic safety
1) Do not look into the delivery outlet of laser directly.
2) Be sure that rated input voltage written on the label is coincident with the supply in the location.
3) After the power has been shut off and the electric line has been unplugged for 10 minutes, the maintain process can only be carried out. Otherwise, it’s dangerous to the personnel or the machine.
4) The machine itself comes with dangerous high-voltage, so non-professional technical personnel are not allowed to disassemble any parts of the machine.
5) Good earthing is very important to operation safety. This equipment has good earthing (yellow and green wires in power line). (Picture A)

 

Functions of handpieces and default parameters
1) Functions of handpieces
Handpieces
Near-infrared laser
 power
Rev of roller
RF energy
Negative pressure Level
Pulse time
NO. 1 handpiece
0~20W
0~36 rpm
0~60J/cm3
1~9
1s ~8s
NO. 2 handpiece
0~20W
N0
0~60J/cm3
1~9
1s~8s
NO. 3 handpiece
0~10W
N0
0~50J/cm3
1~7
1s~6s
NO. 4 handpiece
N0
N0
0~40J/cm3
1~6
1s~4s
2) Default parameters
Handpieces
Near-infrared laser power
Rev of roller
RF energy
Negative pressure Level
Pulse time
NO. 1 handpiece
14W
18 rpm
25J/cm3
3
3s
NO. 2 handpiece
14W
N0
25J/cm3
3
3s
NO. 3 handpiece
6W
N0
25J/cm3
1
2s
NO. 4 handpiece
N0
N0
20J/cm3
1
2s
 This chapter is a general illustration of JS8 Body Shaping System
Our services

 

1.We have 2 years warranty, and lifetime maintenance.
2.Within one month, if the machine is of any big fails, we will send you a new machine.
3.Within 2 year, we will be responsible for the repair if equipment is with small problem,we can delivery the part to you,you fix it according to our install instructions.
4. After 2 years, we also repair the machine, but you need to pay the cost of the changed parts.
5. For your consultation, we offer on-line service.

CE证书.jpg